dicon?s multi-channel mems attenuator module consists of an array of 8 or less mems attenuator components which are used for multi-channel attenuation. dicon?s mems attenuator is based on a micro-electro-mechanical system (mems) chip. multi-channel mems attenuator modules create a significant reduction in the amount of board space which needs to be dedicated to attenuation. low polarization dependent loss over the entire wavelength range ultra-low current consumption smallest multi-channel attenuator package in the telecom industry qualified to gr-1221
multi-channel mems attenuator modules are used to attenuate power levels for multiple wavelength channels or bands. primary applications include dynamic gain equalizers, dwdm and mux/dmux module power level control. u.s. patented. specifications subject to change. copyright ?2003 dicon fiberoptics, inc. all rights reserved.
wavelength range 1528 - 1563 nm insertion loss 0.8 db max. temperature dependence 3, 6 0.3 db max. back-reflection -50 db max. wear-out 1 x 10 cycles min. response speed 2 ms max. repeatability 0.1 db max. fiber type 9/125 corning smf-28 fiber jacket 250 micron, 200 kpsi bare fiber optical power 300 mw max. operating temperature -5 0 c to +75 0 c storage temperature -40 c to +85 c 1. all specifications referenced without connectors in c or l band. 2. relative to 23 c. 3. at minimum loss position. 4. maximum variation over whole c or l band, depending on part number. 5. maximum change of each 400 ghz segment within c or l band, depending on part number. 6. over operating temperature. 1570 - 1610 nm c band l band polarization dependent loss 0 to 15 db 15 to 20 db 0.2 db max. 0.15 db max. 0.1 ps max. polarization mode dispersion 8 o o o flatness broad band application 4 narrow band application 5 0 to 20 db 0.7 db max. 0 to 15 db 0.4 db max. 0 to 20 db 0.2 db max. dicon fiberoptics, inc. 1689 regatta blvd. richmond, ca 94804 tel. (510)620-5000 fax. (510)620-4100 www.diconfiber. com
0048b
1,2
dc drive voltage 20 uwatt max. /attenuator latching type non-latching capacitance 2 pf typ./attenuator voltage damage threshold resistance power consumption 100 kohms min./attenuator 10 vdc max. 0 - 5 vdc
units: mm 1. detail drawing of 10 channel modules available upon request. 8.60 2.54 9.93 27.94 9.93 3.18 47.80 38.20 8.37 4.30 5.60 1
4 channel 8 channel 7 pins 12 pins 39.0 x 26.0 x 9.6 mm 39.0 x 48.0 x 9.6 mm mtm - operating wavelength range 15 1528 - 1563 nm 16 1570 - 1610 nm connector type fc fc/spc fc/apc fc/apc fc/upc fc/upc sc sc/spc sc/apc sc/apc sc/upc sc/upc lc lc/spc lc/upc lc/upc mu/upc mu/upc n none dynamic attenuator range 20 20 db min. x specify x db min. ripple type s 1 slow ripple f fast ripple pigtail length 1 meter x specify x meters 1. minimum insertion loss at 0 v. 2. power off and optical off minimum insertion loss @ 6.5 v or specify @ x v. channels 4 4 channels 8 8 channels - - -- - - - 2 x specify x channel attenuator type t transparent 1 o opaque 2
|